Notifications
Clear all
TIPM still has trouble codes, idle issues, and/or not starting:
- If the vehicle’s battery was not disconnected prior to the removal of the TIPM, it may inadvertently blow a fuse or relay inside the fuse box. There may be multiple fuse boxes in the vehicle.
- Oftentimes times there are communication issues present if the unit is installed back in the vehicle. One of the fastest and easiest ways to clear any soft codes in the vehicle is to do a reset
Hard Battery Reset Procedure:
- Disconnect the battery cables
- Clamp the cables together with the terminals touching (off the battery!)
- Leave the cables maintained in this position for 30 minutes. and then re-install
*This should clear any soft codes and communication issues with the vehicle’s PCI bus.*
If you have any questions or installation issues post your question below. If the light is on, then it will be best to scan for codes. Please post the codes below and we will help you!
This topic was modified 2 years ago by Ernest
This topic was modified 2 years ago by John Wells
This topic was modified 7 months ago 4 times by Ernest
Topic starter
Posted : 07/28/2022 9:14 pm