Notifications
Clear all
I received my repaired TCM installed it and I got a new code "P06B8" before i used to have only the AT light and still having the hard kick on reverse I cleaned the connectors with electrical wire cleaner spray checked all the fuses the fluid and filter are cleaned tried to erase the code and it comes back right away. disconnected the battery cables and connect them together for 30 minutes and still having the issue.
any suggestions? please help.!
Topic starter
Posted : 06/14/2022 1:58 am
I apologize you're still having issues with your part! Could be that you have an active code. Please have your part scanned for codes and let Costumer Support know what codes you are getting so they can create a support ticket and have a technician reach out. Make sure you have your order number ready when you call.
Thank you!
Posted : 06/14/2022 3:21 pm
Hi I checked the codes and found two: p0745 and p06b8 and I tried to erase them and they come right back.
having these symptoms: hard kick on reverse and when driving and coming to a stop it does not go as if it was in neutral so I switch the gear to neutral and back to drive and then after a few seconds engages!
so I guess need to call Customer Support on monday and see if I can get help!
Thank you!
Topic starter
Posted : 06/19/2022 5:11 am
Did your part got repaired by us? And what year, model of your vehicle?
Posted : 06/20/2022 12:56 pm
yes 2010 mazda 3
order number:716471e
part number:lf8m189e1f
serial number:h1402270111g1t01372h4
TCM.
What is the number to call to get a Support ticket?
Thank you!
Topic starter
Posted : 06/23/2022 2:40 am
let Costumer Support know what codes you are getting so they can create a support ticket and have a technician reach out. Make sure you have your order number ready when you call. 1-888-979-9343
This post was modified 2 years ago by Serge - UpFix Team
Posted : 06/23/2022 1:39 pm