☝️My youtube video to remove Tcm
Tools needed: 10mm socket, Rachel, small flat head.
Step1 remove battery cables.(negative 1st), then positive battery post(red cable)
Step 2 remove battery hold down; 2 10mm nuts on metal bar across battery. Then remove battery.
Step 3 disconnect. ECM connectors(X2) and slide wire from plastic loop.
Step 4 Remove 3 bolts in the bottom of battery tray
Step 5 Remove battery tray front partition by lifting forward and up.
Step 6 remove battery tray by pulling towards front of car and upwards
Step7 disconnect connector on TCM
STEP 8 remove 3 10mm bolts from Tcm. LIFT TCM out .
Romen, great video and instructions. Looks like you might have done this once or twice before. You are an expert at this 👏💪