Notifications
Clear all
Do you diagnose the board first to see if it needs repairs? where is power applied on the 8534963 ? Is it the 3 prong or 4 prong
terminal on the board?
thanks
Topic starter
Posted : 08/18/2022 2:55 pm
Thank you for reaching out. Yes, the board gets diagnosed before we attempt any repairs. Typically, we will need to board to determine if the part is repairable or not. I would have to see the board to determine where the power is applied. can you provide us with photos?
Posted : 08/18/2022 2:55 pm
Thank you for getting back to us. The power will be both plugs.
Posted : 08/18/2022 2:56 pm
On CON2, it will be P7 (white wire) and on P2_alt it will be 6 (black with white stripe)
Posted : 08/18/2022 2:57 pm
Can you tell by the pic which color wires I need to put my pos and neg on to check for 120V? thanks
Topic starter
Posted : 08/18/2022 4:26 pm
Topic starter
Posted : 08/18/2022 5:23 pm