Maytag SG1000 contr...
 
Notifications
Clear all

Maytag SG1000 control board AP4037283 or touch pad 306292

 
rkinross
New Member Registered

I have a Maytag SG1000 stackable washer/dryer and the control  pad will no longer start the washer or dryer.  For about 1 month more pressure on the 'regular' wash cycle would start the washer and then all other buttons would work.  But now the touch pad will not operate at all.  I disconnect the ribbon strip and cleaned the contacts with an eraser and alcohol but that did not fix the problem.  The control board is discontinued by the manufacterer https://www.appliancepartspros.com/whirlpool-touch-pad-306292-ap4037283.html and is not stocked anywhere on the web.     Do you fix control boards like this?

Quote
Topic starter Posted : 11/10/2021 8:56 pm
Serge - UpFix Team
Noble Member Moderator

We have amazing techs and can rebuild almost any appliance control board, but if you don't mind, please post the picture of your control board here so we can give you a definite answer, thank you!

ReplyQuote
Posted : 11/10/2021 9:49 pm
rkinross
New Member Registered

I thought I fixed it but it is happening again.

controlpanel1
controlpannel2

 

ReplyQuote
Topic starter Posted : 10/04/2022 6:04 pm
Serge - UpFix Team
Noble Member Moderator

Thank you for the pictures.  But I was looking for control board pictures.  Can you be more specific about your issue.  What's happening again? 

ReplyQuote
Posted : 10/07/2022 4:02 pm
Share: