Notifications
Clear all
Will this part fix my ice maker, I get code E5 on number 56, it passes all other test. I have replaced ice make 3x due to code, I replaced duel inlet valve, checked water pressure and alls I get on the ice cycle is water dripping from ice maker. Not sure what else it could be but this board now. Any thing I ma be missing?
Topic starter
Posted : 04/13/2022 12:41 pm
Water dripping is not usually the cause of the bad circuit board. But, if you have done all recommended steps and still have issues the control board could be the issue. When we get the board we can check each component. If there is no issue with the control board then there is no charge.
Posted : 04/13/2022 12:42 pm