Notifications
Clear all
When I switch on the oven, the heating element comes on. But then gives me an F10 code. Is there a problem with a unit?
Topic starter
Posted : 11/03/2021 12:11 pm
The resistance of the oven sensor should be checked First For voltage 240V Then all wires For burnt or loose connections. At 100 degrees, the oven sensor should have a resistance of 1156 ohms. you must test it again, this time From the board to the harness to confirm that the harness is in excellent working order. If the problem persists. Then problem has been narrowed down to one of the board's relays on the control board. But we do Fix Faulty control board modules. Here is a link> https://www.upfix.com/product-category/appliances/range-stove-oven/
Posted : 11/03/2021 2:39 pm