Notifications
Clear all
I have a control board that I would like you to repair. The broiler will not turn off when the oven is turned on. I believe a relay is bad. When I was removing the board I noticed a couple of the solder joints will need to be repaired as well. I also would like to know if I will receive the same board I send in. I'm asking because I'm not able to remove one of the wire connections, and I will need to send this attached to the board. Lastly, I'm not able to find a KitchenAid part#, but when I was doing research I found the WP#. I'm assuming they are the same board, but if they aren't will you still repair my board?
Topic starter
Posted : 03/05/2024 4:32 pm
We do not have any boards in stock to send you. We only repair the board you send in and that's the board we send out. We can work on your board and address the issues you are having. Please follow the link below to place your repair order and send us your board for repair.
https://www.upfix.com/product/ge-wp8301583-range-stove-oven-control-board-repair/
Posted : 03/05/2024 4:54 pm