Notifications
Clear all
I have a Kitchen Aid dropin range KEDC205Y. It gave me a F2 alarm code. I pressed cancel and the code went away. But, when I tried to enter the oven temperature, I got F2 again. I replaced the sensor and the range worked for a few weeks, but still gave me the F2 code sometimes, even though I could now use the oven.
My question is: The Tech Sheet says for F2, "If sensor is good, and problem remains, replace electronic module." I have looked for the term "electronic module", but cannot find any part called that. The closest I have found is Oven Control Board. Is that the same thing ? If so, then it looks like it is Whirlpool 3149459.
Any advice would be greatly appreciated.
Topic starter
Posted : 09/08/2023 5:58 pm
The tech sheet is most likely referring to the control board. Most repairs are done through the board. We are able to test and service part number 3149459 but we do not have the actual part in stock.
If you wish to send us your part, the service takes 5-7 business days and the cost is $169.99. You can click the link below to begin your order.
https://www.upfix.com/product/3149459-whirlpool-range-stove-oven-control-board-repair/
There is no need to include anything inside the box with your part as the shipping label will already be connected to your order. We will bill you once we are done with the service. Please note, if the part tests as a good unit or something that is unrepairable, we will issue a $39.99 bench test fee.
Thank you!
Posted : 09/08/2023 5:59 pm