Notifications
Clear all
Hotpoint Fault Codes for Range/Stove/Oven
| Failure Code | Fault Code Description | Solution |
| F0 | Stuck touch pad | Replace/repair control board or send your original to UpFix.com for repair. |
| F1 | Stuck touch pad | Replace/repair control board or send your original to UpFix.com for repair. |
| F2 | Control senses oven temp above 615F - 630F | Look for welded relay contacts on bake or broil relays. If this happens, replace/repair oven control board. You can send control board to UpFix.com for repair
Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective. |
| F3 | Open or shorted oven temperature sensor | Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor |
| F4 | Open or shorted oven temperature sensor | Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor |
| F7 | Stuck touch pad or bad clock | Replace/repair control board or send your original to UpFix.com for repair. |
| F9 | Lock switch | Check wiring to door lock switch |
Faulty Control Board Module?
Get yours repaired and save hundreds of dollars!
We can rebuild your faulty control board module, here is the repair link https://www.upfix.com/product-category/appliances/range-stove-oven/
Topic starter
Posted : 10/02/2021 10:27 pm