Notifications
Clear all
GE Profile Wall Oven Model JK915SF2SS will not heat to requested temp and will not hold the temp consistently. Temperature Probe has been replaced without help. Control Board is WB27T10400. Does this sound like a control board problem or something else? Help is appreciated!!
Topic starter
Posted : 02/19/2023 8:26 pm
The resistance of the oven sensor should be checked first for voltage 240V Then all wires for burnt or loose connections . At 100 degrees, the oven sensor should have a resistance of 1156 ohms. you must test it again, this time from the board to the harness to confirm that the harness is in excellent working order. If the problem persists. Then problem has been narrowed down to one of the board's relays on control board. But we do fix faulty control board modules. Here is a link https://www.upfix.com/product-category
The resistance of the oven sensor should be checked first for voltage 240V Then all wires for burnt or loose connections . At 100 degrees, the oven sensor should have a resistance of 1156 ohms. you must test it again, this time from the board to the harness to confirm that the harness is in excellent working order. If the problem persists. Then problem has been narrowed down to one of the board's relays on control board. But we do fix faulty control board modules. Here is a link https://www.upfix.com/product-category
Posted : 02/19/2023 11:44 pm