Notifications
Clear all
Dacor Fault Codes for Range/Stove/Oven
| Failure Code | Fault Code Description | Solution |
| F0 | Function key stuck | Replace/repair touch pad or if touch pad is part of the clock, replace/repair the clock (ERC). UpFix.com can repair your faulty control board |
| F1 | System Watchdog Circuit | Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC). UpFix.com can repair your faulty control board |
| F2 | Heating mode high temperature | This alarm is activated when the ERC senses a runaway heat condition or when the temperature exceeds "runaway limits". The ERC will beep until the cancel or another function is selected. If the alarm repeats the F2 code check the oven sensor and wiring after first checking for a stuck relay. If alarm goes away verify the oven will complete a clean cycle without any type of failure. |
| F3 | Shorted oven temperature sensor | Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor |
| F4 | Open oven temperature sensor | Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor |
| F6 | EEPROM checksum error | Replace/repair main control board (also called clock or ERC). UpFix.com can repair your faulty control board
The main control operates a series of software commands, which control the various features and functions of the oven. Each function or operation has a numerical value assigned to it. The numerical values can be added up - this is called the check sum operation. Every time the system is powered up and after each clean cycle the system performs a check sum and compares the value to the value programmed into the software (stored in memory). An EEPROM check sum error or F6 code occurs when the values differ. If this happens, replace/repair the main control board (also called clock or ERC). UpFix.com can repair your faulty control board |
| F7 | Door lock enabled above temperature | Check the door lock switches and wiring. |
| F8 | Door locking switch | Check the door lock switches and wiring. |
Faulty Control Board Module?
Get yours repaired and save hundreds of dollars!
We can rebuild your faulty control board module, here is the repair link https://www.upfix.com/product-category/appliances/range-stove-oven/
Topic starter
Posted : 10/02/2021 9:41 pm