Notifications
Clear all
Ford FICM F250/350 – If your vehicle is still having technical difficulties check these steps:
- Check the fuses and clean connectors, ensure its properly seated
- If the alternator or battery is bad it will drain the FICM and may possibly make it bad again, to ensure this doesn’t happen make sure you’re charging system is getting at least 12.5 volts before it even gets the FICM. Low batteries may cause this and you can take your alternator and get it tested locally
- The FICM should be getting 48v as this is the proper voltage required if it drops lower than that then again check the former steps to make sure that there’s nothing in the truck causing voltage fluctuations.
This topic was modified 3 years ago by Ernest
Topic starter
Posted : 04/18/2022 9:55 pm
I found this on the net google search for my 2001 ford f250 SD fuse box, filled out info make model year..shows picture of part and got this message:
IMPORTANT:
SORRY, WE DONT SERVICE/REPAIR THIS PARTICULAR PART (Year, Make, Model).
This post was modified 6 months ago by ronald sjodin
Posted : 05/12/2024 12:46 pm
The fuse box isn't supported for repairs. However, if you provide the VIN, codes, and issues we can assist you further. You can use the custom repair link below.
https://www.upfix.com/repair-request/
Also, if the issues point to a faulty GEM module that mounts right on top of that fuse box, then we should be able to refurbish it for you. Check out the link below and see if the codes/issues we fix on there match up with what you're currently experiencing with your unit.
https://www.upfix.com/product/ford-f250-1997-2004-bcm-body-control-module/
Topic starter
Posted : 05/12/2024 10:49 pm
Serge - UpFix Team liked