Notifications
Clear all
98 ranger 4x4 not GEM switching I have already tried replacing transfer case motor and dash switch.
I switch to four high. I hear the click and the four high light comes on. But it doesn’t switch into 4 high. If I switch to 4 low. I again hear the click but the 4 high light stays on and doesn’t switch into low. I switch back to 2 wheel and light turns off
Could this be the GEM? No other electrical issues
Topic starter
Posted : 01/30/2025 3:31 pm
It sounds like you're having quite the puzzle with your vehicle's four-wheel drive system! While the General Electric Module (GEM) can sometimes cause issues, based on the information available, it doesn't seem to be directly related to the symptoms you're describing.
One thing to consider is the condition of the harness or multi-function switch. If there's an issue with these components, it can cause lighting issues and could potentially impact other electrical systems indirectly. However, since you've mentioned that there are no other electrical issues, this might not be the case.
You may visit our website to check the available services that help you solve your problem https://www.upfix.com/ or you may call us at 888-979-9343 to better assist you
Posted : 01/30/2025 3:40 pm