Notifications
Clear all
My washing machine stopped functioning. I did some research. I'm getting error code E56, which states that the control board or motor should be replaced.
Topic starter
Posted : 12/14/2021 12:57 pm
Check for shorts on the ground in the harness. If none are detected, make sure the tub spins freely by hand. High motor current is indicated by the trouble code E-56. A defective motor, or control board, a shorted harness, or anything else that prevents the tub from rotating might cause this. If you have issue with a control board we can fix that for you. Here is the service link https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 12/14/2021 12:57 pm