Notifications
Clear all
In any wash cycle, my washer refuses to allow water in. I examined the conductivity of the solenoids and they are ok. My drain pump does not discharge when I use the wash/drain cycle. I can detect 120 V on the drain pump fast connect and the resistance is fine. I receive an E57 error . My motor spins easily, and resistance between pins 1 and 3 and pins 4 and 5 is good. Is there a problem with the control board?
Topic starter
Posted : 11/19/2021 2:14 pm
It's most likely a problem with the speed control board that's causing the E57 error. or main board is the problem. We can rebuild faulty control board modules, here is the link https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 11/19/2021 4:42 pm