Notifications
Clear all
The washer starts and runs for a few seconds, then stops, then starts and stops again after a minute or two. This procedure will continue as long as you leave the washer running, and no error code will appear. It appears to be either the control board or the main board, but we are unsure.
Topic starter
Posted : 11/23/2021 6:24 pm
The problem is most likely a defective main control board. We can rebuild faulty control board modules, here is the link: https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 11/23/2021 8:52 pm