Notifications
Clear all
The error code E41 is shown. The voltage on J2 is 120V. According to the manual, the issue is with the control board. I was also curious whether there were any typical control board fixes.
Topic starter
Posted : 12/02/2021 3:34 pm
E41 Code means. The control board believes the door switch is open. The error code is usually fixed and cleared by changing the door switch. If this is not the case, repair the main control board. Here is the service link https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 12/02/2021 6:02 pm