Notifications
Clear all
Between the wash and rinse cycles, the washer does not always conduct a high-speed spin. To get it to spin out, I had to manually push the rinse mode. The E41 code has been saved. The door switch/latch assembly was replaced. I can't seem to get rid of the E41 code for even a second. After leaving the washer unplugged for 5 hours, the error code appeared as soon as it was put in. I also tried unplugging and replugging and opening and closing the door six times. The code is still present.
Topic starter
Posted : 11/30/2021 1:10 pm
The control board believes the door switch is turned on. Check for continuity between the pins of the connector by disconnecting it from J2 on the control board. Open. Examine the doorknob. Replace the door switch assembly if it is in excellent working order. Closed. The control board should be repaired. Here is the service link
https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 11/30/2021 3:38 pm