Notifications
Clear all
The Washer tub was filled with water, run through the cycle, and suddenly came to a halt alomost at end. The tub was not draining It simply keeps. I replaced the hose, but the problem persists. There were no problems before I changed the hose. I'm getting the E32 error code. Pressure sensor or main control board?
Topic starter
Posted : 11/17/2021 12:27 pm
First, unplug the pressure sensor tube from the pressure switch and blow through it to make sure it's not clogged. Then ensure that no wires are broken or lose Th. If you do a continuity test on these wires, you should be able to detect whether or not the pressure switch is treading water in the tub. It could be a pressure sensor or main control board faulty. If you got a Faulty board, we can fix that issue for you. Here is more information https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 11/17/2021 2:55 pm