Notifications
Clear all
I have a board from a GTW750CPL1DG, The lid lock failed and in the attempt to bypass the switch i evidently shorted out the lock circuit, the chip just above the lid lock connector is blown up. I Would like to confirm you can repair this
Thank you
Topic starter
Posted : 02/06/2022 4:22 pm
Thank you for contacting UpFix. Unfortunately iam not sure what blown part you referring to. Can you send really closeup picture of faulty part so we can tell you for sure. if we got that part in stuck.
Posted : 02/06/2022 11:22 pm
The pic i took was close as i could get, the file looses resolution after the upload it is chip 0513 it is a surface mount with 4 contacts and only 3 of then are soldered, ill attach the files and maybe that will help.
thank you
This post was modified 3 years ago by HarlinSilvers
Topic starter
Posted : 02/07/2022 11:16 am
That chip is not a common part that fails. We currently dont have it in stock. However we should be able to get it. We will need the circuit board before we can order the parts, there could be other parts that failed/blown. It may take a few weeks for the ordered parts to come in
Here is the service link
https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 02/08/2022 1:27 pm