Notifications
Clear all
I have a Frigidaire washer that gives me an error number of e55, which states that the motor has overheated and that I should check the ohms on the motor coils, which are all OK according to the spec sheet. I've changed the speed control board as well as the motor, but the error number still reads E55. I was considering changing the main control board, but I wanted to get another perspective first.
Topic starter
Posted : 12/02/2021 5:01 pm
Make that the tub pulley is spinning freely and that the tub itself is spinning freely. If it doesn't, you'll need to inspect the tub bearings. If the tub spins smoothly, the motor pulley spins freely, and you have a new speed control board, check for adequate connections between the motor and the board. If all of the wirings appear to be in order, the main control board is the source of the problem. We can rebuild faulty control board modules, here is the link: https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 12/02/2021 7:29 pm