Notifications
Clear all
My washer is a Frigidaire affinity getting an E47 error code. It rises, rotates, and agitates, yet it does not spin. I conducted diagnostics and found that the lock assembly should be tested at roughly 1500 ohms, according to the E47 error code. That was roughly 1100 ohms when I did it. Then it started to replace the control board, so I did, but it didn't cure the problem. What else may it be? Could it be a defective control board (user interface control board, heating control board with transformer, or the door lock assembly?
Topic starter
Posted : 12/03/2021 3:40 pm
The lock assembly is most likely the problem. If this is not the case, the main control board must be repaired. e can rebuild faulty control board modules, here is the link https://www.upfix.com/product-category/appliances/washing-machine/
Posted : 12/03/2021 6:08 pm