Notifications
Clear all
Error number E20 is shown on my washer. What does this imply? Is it anything you can fix?
Topic starter
Posted : 12/13/2021 5:19 pm
The E20 error code typically indicates that the pump system is clogged. To determine what is causing the E20 error code, follow these procedures. Remember to disconnect the cable from the pump. Pull the pump out while keeping the black rubber boot on. Remove the final clamp and use a sharpie marker to mark the pump's orientation to the boot. Now check inside the black rubber boot and gently remove the plastic basket within, as well as anything else that doesn't belong. Hope that helps
Posted : 12/13/2021 5:27 pm