Notifications
Clear all
The dryer Frigidaire runs for a time before shutting off before the load is completely dry. Then I got fault code 95 on the dryer. I've also had error code 62 in the past with the identical issue described above. Not sure how to resolve the issue.
Topic starter
Posted : 11/12/2021 3:43 pm
This might have been an indication of a control NTC. The circuit is open. Remove the control thermistor's wires to measure resistance. Check to wire between the thermistor and the main control board if the reading is within 50 K . If the condition is satisfactory, the main control board should be repaired. Here is more Information https://www.upfix.com/product-category/appliances/dryer/
Posted : 11/12/2021 6:11 pm