Notifications
Clear all
I have a Maytag quiet clean that only partly fills and does not spray unless I manually add 2-3 cups more water. This appears to be a timed inlet valve, but I'm curious how it would function with different input pressures. It appears to cycle OK, but it produces a lot of noise, and the dishes remain dirty since the water level is too low to obtain a spray. If I can find a replacement valve for the Whirlpool 9902628, could you please advise if this will solve the problem?
Topic starter
Posted : 06/16/2022 8:38 pm
Try this unplugged dishwasher, turn off the water, and access the inlet valve after removing the bottom front panel (4 screws). A little snug you are able to completely detach the inlet valve.
Then removed the 4 brass screws holding the valve together You will see a fine mesh screen filled with gritty particles, and rinsed it out with a water spray followed up with compressed air on the screen.
put it back together and hope it works.
Posted : 06/16/2022 8:50 pm