Notifications
Clear all
My 2005 Chevy Silverado 3500 with a 6.6L Duramax LLY Diesel has a bad Fuel Injection Control Module
(FICM). The module throws code:
U0105 : Fuel Injection Control Module Loss of Communication.
P2149: Fuel Injector Group "B" Supply Voltage Circuit/Open.
P2146: Fuel Injector Group “A” Supply Voltage Circuit/Open.
No fuses are blown and all wiring harnesses are in good working condition.
Can you rebuild this Module?
GM does NOT supply this module nor repair it anymore.
Thanks in advance for the help.
Topic starter
Posted : 04/04/2022 2:55 pm
We’ve never done one before but we can do a diagnostic on it. Check the wiring going into the FICM unit if their getting power and ground to and from, we can run a diagnostic on it and then give you a quote for repair once it's here
This post was modified 3 years ago by Serge - UpFix Team
Posted : 04/04/2022 3:16 pm
Yes sir the strap has been cut and the complete wiring harness has been checked for cracked, frayed or broken wires. Both connectors to the module were checked for bent pins and ohmed for continuity. I installed a friends FICM and the truck fired right up an all codes were gone. I just need mine fixed since there are none available.
Thank you..
Topic starter
Posted : 04/05/2022 2:40 am
Send it in
Here is the address
UpFix
4991 BU Bowman Dr
Buford GA 30518
Ps.. Make sure you include the note with all your information in the box, like phone number and e-mail
And last part from forum describe the issue
This post was modified 2 years ago by Serge - UpFix Team
Posted : 04/05/2022 10:48 am
I sent it to ya’ll..any idea on if it is repairable or not yet..
I sure hope so…
thanks a million..
Michael
This post was modified 3 years ago by Michael Davidson
Topic starter
Posted : 04/26/2022 1:55 am
Unfortunately, I can't look you up. You can call costumer service and have your order number ready , and they will let you know your order status.
Posted : 04/26/2022 2:07 am