Notifications
Clear all
I have a 2008 Ford F150 with a bad ABS module. The codes off the module were C1300-20 with a B1596-E0. I swapped to the new module and the C1300 went away along with the brake warning light. After the module swap I got B1596-E0, B2900-E0, and U0100-20. I was able to clear U0100-20 but the B1596-E0 & B2900-E0 stay with the ABS warning light. Suspect issue is new module not being programmed. Can you repair my old module (with original programming) so I can get the ABS light to clear?
Topic starter
Posted : 09/19/2022 5:23 pm
Think about what you just told me. B1596 programming issue on both modules. Repairing C1300 we can do for you, but if the B1596 is in both modules you might be having another issue. Not normal to have programming issues in both modules. I would double-check all the wiring, sound like something might be going on there.
Posted : 09/19/2022 5:24 pm
Yes, we can repair your original module for the C1300. Unfortunately, we are unable to program modules. That will need to be completed while the module is installed in the vehicle
Posted : 09/19/2022 5:25 pm
Could the B1596 be associated with the new module not being correctly programmed? I checked all wiring (also fuse boxes, connectors, etc) everything looks to be in good shape. Is it worth sending the original in to get it refurbished? Kinda out of ideas at this point.
Topic starter
Posted : 09/19/2022 7:51 pm