Notifications
Clear all
have experienced some problems with the ABS light and parking brake turning on on my 2007 Jeep Patriot.
The codes are as follows:
U1003 lost contact with the ABS module.
Using multi-axis acceleration sensing mod, U0125 lost communication (dynamic sensor)
Too much voltage from the C2101 battery
Performance of the C140a transfer case motor
U0415 got incorrect data from the ABS module
I have so far only examined the IOD fuse, which is fine. Nothing appeared to be blown when I checked through the two fuse blocks in the engine are
According to the diagnostic handbook, various pinouts are not lighting up when they should after I unplugged the connector for the ABS module. Specifically, the top two ground pins. I'm also unsure of their location in the engine bay.
Anyone have a suggestion?
Topic starter
Posted : 09/23/2022 5:18 pm
Thank you for your inquiry. We do repair ABS control modules Here is the link https://www.upfix.com/product-category/repair-return/abs-modules-repair/
Posted : 09/23/2022 5:18 pm