Notifications
Clear all
I have a 2007 Camry Hybrid that needs the brake actuator rebuilt. I have the assembly off the car but am unsure about separating the pump from the actuator. The only video online does not explain how to separate the parts for shipment. If you could advise I would appreciate it.
This topic was modified 9 months ago by David Clark
Topic starter
Posted : 02/16/2024 5:55 pm
Once the assembly is off there are 4 bolts that hold the module onto the pump. Remove the 4 bolts (screws) and pull the module off the pump.
Posted : 02/16/2024 6:01 pm
How do you get the top off the module? Mine has clips all the way around it which I got loose but there seems to be a screw holding it in the center of the top
Topic starter
Posted : 02/16/2024 6:05 pm
Just spoke with the manager. Sorry we don't work on that module. He recommended getting a complete replacement unit. He said those units are normally not repairable. Sorry to tell you that. We didn't want you to waste your time in sending that unit.
Posted : 02/16/2024 6:06 pm