Notifications
Clear all
Ok so here is my problem ....I have a 2003 sprinter the abs light was on for a couple of weeks then all of a sudden traction light came on and it went into limp mode aka no boost and 2nd gear only...I plug in the scanner and no communication from abs and no codes.....I test the abs pump power in is good remove the pump and module .. power probe at the pump every thing test good...is there a schematic I can get to test the module voltage/ohms before I send it to you to make sure it is the issue...thank you
Topic starter
Posted : 10/14/2021 1:38 pm
My sprinter it's an 04, the issues I was having were from making a right or left turn. This would trigger the slip control and all four lights on the dashboard light up related to the ABS.
This post was modified 3 years ago by John T
Posted : 10/14/2021 4:06 pm
I think in your case if you have no communication you might have a bad module. Removing the Module is pretty easy and it may be worth the few dollars UpFix charges to determine if it's bad or not.
Posted : 10/15/2021 5:35 am