Notifications
Clear all
I recently acquired a 2008 four-door Jeep Wrangler that lacked all brake lights on the dash. red brake light, traction control, ABS, and esp. If you have an abs portable scanner. It emits c2200 error code. Internal bug in the ABS module. I believe the service handbook advises replacing the module if the error reappears immediately after clearing. The code does not return immediately; instead, it does so after I have traveled more than 100 feet. The wheels and brakes were taken off, and I cleaned everything. Additionally, examine any related wire harnesses. My knowledge suggests that a defective wheel speed sensor may be to blame, but I don't have a scan tool that can examine wheel speed sensors in real time while I'm driving. Any thoughts?
Topic starter
Posted : 09/30/2022 4:38 pm
Thank you for your inquiry. We do repair ABS control modules Here is the link https://www.upfix.com/product-category/repair-return/abs-modules-repair/
Posted : 09/30/2022 4:38 pm