Notifications
Clear all
I'm searching for assistance with a 2008 Jeep Patriot 2.0crd ABS module issue. I started to follow the procedure after receiving the C2116 code.
I checked fuse # 35 and it was good. I pulled the connector from the ABS module to see if there was a poor contact, cleaned it with a special cleaner, then rejoined the contact while the lights for the ABS, low esp, 4x4, engine, and brakes were all on. diag: Unable to communicate with the ABS module
I repeatedly verified that the plug's connection to the ABS module was secure, but nothing changed. I may have blown a fuse due to a poor manipulation, can someone please help? Many thanks
Topic starter
Posted : 09/29/2022 12:23 pm
Thank you for your inquiry. We do repair ABS control modules Here is the link https://www.upfix.com/product-category/repair-return/abs-modules-repair/
Posted : 09/29/2022 12:23 pm